EKOPEL® ROLL-ON Bathtub Coating. Odourless. 1 L

EKOPEL 2K ROLL-ON Bathtub Coating is the innovative solution for easy and versatile resurfacing

EKOPEL 2K ROLL-ON is the latest innovation from our company, standing out from other products by its simple application with a roller – no spray equipment or pouring techniques needed.

This multifunctional coating system is perfect for resurfacing shower trays, bathtubs, tiles, and floors.

Why choose EKOPEL 2K ROLL-ON?
✔ Fast curing – ready for use again after just 24 hours.
✔ Easy roller application – ideal for both DIY enthusiasts and professionals.
✔ No need to remove the drain pipe – perfect for quick renovations without extra hassle.
✔ Odourless – no unpleasant paint smells, no lengthy airing required.
✔ Free from harmful solvents and VOCs – more environmentally friendly than many competing products.

Backed by 15 years of experience with coatings, EKOPEL 2K ROLL-ON delivers excellent adhesion on a variety of surfaces without cracking or flaking.

Using premium European raw materials and proven durability trusted by both DIYers and professionals, it guarantees a impact-resistant, long-lasting coating that maintains its like-new appearance for years to come.

€118,00 EUR

Taxes included. Shipping calculated at checkout.

1 Complete kit = sufficient for 1 standard bathtub up to 170 cm in length.

Included in the delivery:

• EKOPEL 2K Classic coating (Component A + Hardener)
• Surface cleaner for preparing the surface
• Sandpaper for preparing the bathtub
• Wooden mixing stick for blending the components
• Notched spatula for spreading the material on the tub floor

Technical data:

• Total volume: 2.4 L (2.0 L resin + 0.4 L hardener)
• Coverage: sufficient for 1 standard bathtub up to 170 cm in length
• Working time: approx. 90 minutes
• Ready for use after: approx. 48 hours

Also required or helpful (not included in the kit):

• 1 disposable plastic cup 500 ml
• 1 disposable plastic cup 200 ml
• Masking tape for edge protection
• Protective film for floor and bathtub front
• Bin bags
• Paper towels
• Screwdriver for removing the siphon cover
• Utility knife for removing old silicone seals
• Baking soda for cleaning
• Hairdryer for warming the surface if needed
• Protective gloves
• Protective clothing or clothes that can get dirty

EKOPEL 2K Classic is applied using a pouring method and self-levels on the surface. This results in a smooth, high-gloss finish without roller or brush marks.

Technical advantages:

• Suitable for bathtubs up to 170 cm in length and 80 cm in width
• Working time: approx. 90 minutes after mixing
• Bathtub usable again after approx. 48 hours
• Cleaning agents can be used after approx. 7 days

Suitable for:

• Cast iron bathtubs
• Steel bathtubs
• Fibreglass/acrylic bathtubs

Important for a perfect result:

• Minimum temperature: +20 °C
• Ideal room temperature: +23–24 °C
• Heat bathroom 1 day before and 2 days after resurfacing

Shipping:

• Orders are prepared within 1 business day
• Delivery time: approx. 1–7 business days, depending on the destination
• Secure packaging for sensitive 2K materials
• Shipment tracking provided immediately after dispatch
• Delivery within Germany, to other EU countries, as well as the UK, Norway, and Switzerland
• For shipments to other countries, please contact us before placing your order

Important notes:

• Please check the goods immediately upon receipt for completeness and any transport damage.
• Store the material in a dry place at room temperature.

Returns:

• Returns of unopened products accepted within 14 days
• Opened or used sets cannot be returned, as these are chemical 2K products

If you have any questions, our support team will be happy to assist you.

Technical Data Sheet (PDF) → View PDF

Safety Data Sheet (SDS) → Available upon request

Care instructions for the bathtub (PDF) → View PDF

MADE IN EU

Made in Slovenia

Tested according to DIN EN 71-3

Free from heavy metals

Strong adhesion

No peeling with correct application

Personal Support

We are here to assist with any application questions

Frequently Asked Questions

All EKOPEL 2K materials are designed for resurfacing old bathtubs and are applied using a pouring technique. They create a smooth, thick, and durable surface with excellent adhesion.

EKOPEL 2K Classic cures in about 48 hours and is particularly suitable for DIY enthusiasts due to its longer working time.

EKOPEL 2K Optimum cures in approximately 24 hours and is ideal when the bathtub needs to be back in use sooner.

EKOPEL 2K Gold also cures in around 24 hours and offers enhanced UV protection. If your bathroom has a window or the bathtub is exposed to sunlight, we recommend EKOPEL 2K Gold.

EKOPEL 2K is applied using a pouring technique. The material flows evenly over the surface, creating an extra thick, smooth, and glossy coating.

EKOPEL Roll-On is applied in two coats with a roller. It is especially suitable when the drain cannot be disassembled or when a simpler roller application is preferred. Roll-On can also be used on wall and floor tiles.

EKOPEL 2K is suitable for steel, cast iron, ceramic, fiberglass, and previously coated bathtubs.

For acrylic bathtubs, application is only recommended if the walls are stable and non-flexible. If the surface moves or flexes when pressed, we do not recommend using it.

For a standard bathtub up to 170 × 80 cm, you will need an EKOPEL 2K set with 2.4 L.

For larger bathtubs, we recommend an additional 1.2 L set.

For shower trays up to 90 × 90 cm, a 1.2 L set is usually sufficient. For larger shower areas, we recommend a 2.4 L set.

The EKOPEL 2K set already includes the main material and essential accessories.

In addition, you will need masking tape, protective film or paper for the floor, a hairdryer or heat gun, a container with approximately 400-500 ml capacity, tools to remove or open the drain, a knife or cutter, cleaning cloths, and a solvent for cleaning your tools.

We also recommend wearing clothing that can get dirty.

Before application, thoroughly clean the bathroom. Remove dust from shelves, walls, ceiling, and surfaces to prevent any particles from settling on the new coating.

Take out towels, toiletries, and any loose items from the bathroom. Keep windows closed during application to avoid dust or insects landing on the surface.

The room temperature should be at least +20 °C starting one day before application and throughout the curing process.

The bathtub must be clean, dry, grease-free, and free of silicone, lime scale, rust, and loose old coating.

All silicone residues must be completely removed, as the coating will not reliably adhere to them. Lime scale deposits, rust spots, and loose old coatings must also be fully removed.

Deep damage, grooves, or chipped areas over 1 mm should be filled with epoxy or polyester filler before coating and then sanded smooth.

Add the entire Component B into the bucket with Component A. Mix the material thoroughly using the supplied wooden stick.

Stir carefully for about 10 minutes to ensure no unmixed residue remains on the bottom or sides. Let the mixture rest for approximately 5 minutes, then stir again for another 5 minutes.

The material is then ready for application.

EKOPEL 2K is applied by pouring, not with a roller or brush.

Use a cup with a capacity of about 400-500 ml and pour the material evenly over the edges and walls of the bathtub. The coating flows slowly downward, spreading smoothly across the surface.

This pouring method creates an exceptionally smooth, thick-layer coating with a high-gloss finish.

If possible, we recommend removing the drain or at least the drain cover. This allows any excess material to drain off cleanly.

If the drain cannot be removed, the drain opening must be carefully sealed. Cover the opening with paper, firmly tape it down, and carefully cut the tape along the contour.

The overflow should also be removed or carefully taped off.

The room temperature should be at least +20°C. This temperature should be maintained one day before application, during the process, and throughout curing.

For easier application, we recommend warming Component A to around +30°C before use. For example, place the container in warm water or store it in a warm place a day prior.

Too low temperatures can impair flow properties and significantly extend curing time.

At a room temperature of around +24 °C, the bathtub can be used carefully again after approximately 24 to 48 hours, depending on the product. At around +21 °C, we recommend waiting 2-3 days before using the bathtub. Curing may take longer at lower temperatures. Bottles, soap containers, pets, as well as products containing dyes such as hair colour or coloured bath additives should only be used after approximately 7-14 days.

Small dust particles, insects, droplets, or surface irregularities can be carefully treated after curing.

Minor unevenness can be smoothed with fine sandpaper and then polished with polishing paste. For small scratches or damaged areas, we recommend a repair kit.

Deep damage should be repaired as soon as possible to prevent water from seeping under the coating.

Use mild bathroom cleaners without abrasive scrubbers. Cleaners with a gentle acidic base are generally suitable.

Avoid stiff brushes, abrasive sponges, and highly abrasive cleaning agents. Residues from hair dye, coloured bath additives, or cosmetic products should be removed immediately.

Proper care significantly extends the lifespan of the coating.

EKOPEL 2K is virtually odourless and free from strongly odorous solvents. Any slight smell dissipates quickly.

The product has been tested according to DIN EN 71-3. Nevertheless, we recommend using standard protective gear such as gloves, safety goggles, and ensuring good ventilation during application.

Avoid contact with skin and eyes.

Cured material can generally be disposed of with household waste. Uncured material residues should be disposed of as hazardous waste.

Liquid leftovers can be mixed together and, once fully cured, disposed of.

Store the material in a dry place, well sealed, and at temperatures between +5 and +35 °C. Shelf life is 2 years from the production date.

The material has a shelf life of 2 years from the production date, provided it is stored dry, well sealed, and at temperatures between +5 and +35 °C. The product can be used within this period.

With correct preparation, proper application, and normal maintenance, the new coating can last for many years.

The actual durability depends greatly on surface preparation, application, cleaning, and everyday use.

Yes, EKOPEL 2K can be tinted with compatible EKOPEL colour pastes.

The colour should be added to Component A before mixing with Component B. The required amount depends on the respective colour chart.

Alternatively, pre-tinted options can also be used if available.